Product guide
SRT Redundancy Proxy
Receive one SRT input and forward it to two independently configured destinations.
Overview
Use this guide to relay one SRT input to as many as two destinations while viewing the forwarding state.
Installation
- Install the application from its verified distribution link below.
- Document the input mode and port and the settings for both destinations.
- Confirm that every required UDP path is allowed by the applicable firewalls.
Basic configuration
- Configure and start the input side first.
- Configure each output with its own mode, address, port, and encryption values.
- Leave an unused output disabled instead of entering an unverified destination.
- Check the displayed state for the input and each enabled output.
Main operations
Verify that input packets are arriving before troubleshooting an output. Test destinations one at a time, then confirm both together.
Checks before use
- A second output provides another destination; it does not repair a failed source or shared network path.
- Confirm the capacity of the outgoing network for both copies.
- Do not expose listening ports directly to untrusted networks.
Troubleshooting
Use the status display to identify whether the input or one output is affected. See the relay FAQ.